|
|
> Committees
Organizing Committee
- D. F. G. Durão, Universidade Lusíada, Portugal
[durao@lis.ulusiada.pt] [http://www.ulusiada.pt/]
- K. Hishida, Keio University, Japan
[hishida@sd.keio.ac.jp] [http://www.sd.keio.ac.jp/]
- E. K. Longmire, University of Minnesota, USA
[ellen@aem.umn.edu] [http://www.aem.umn.edu]
- A. L. Moreira, Instituto Superior Técnico, Portugal
[moreira@dem.ist.utl.pt] [http://in3.dem.ist.utl.pt/]
- C. Tropea, Technical University of Darmstadt, Germany
[ctropea@sla.tu-darmstadt.de] [http://www.tu-darmstadt.de/]
Former Organizers
- F. Durst, Lehrstuhl fur Stroemungsmechanik, University of Erlangen - Nurenberg, Germany
[http://www.lstm.uni-erlangen.de/]
- J. H. Whitelaw, Department of Mechanical Engineering, Imperial College London, UK
- M. Maeda, Keio University, Japan
[http://www.keio.ac.jp/]
- M. V. Heitor
[mheitor@dem.ist.utl.pt]
- R. J. Adrian, Arizona State University, USA
[rjadrian@asu.edu] [http://www.asu.edu/]
Advisory Committee
- W. Bachalo, Artium Technologies Inc., USA
[Wbachalo@aol.com ] [http://www.artium.com/]
- J. Borée, CNRS, ENSMA, France
[jacques.boree@lea.ensma.fr] [http://www.ensma.fr/]
- Günter Brenn , Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, Austria
[brenn@fluidmech.tu-graz.ac.at] [http://www.isw.tugraz.at/]
- C. Brücker, Institut für Mechanik und Fluiddynamik, Germany
[Christoph.Bruecker@imfd.tu-freiberg.de] [http://www.imfd.tu-freiberg.de/]
- A. Cenedese, Università degli Studi di Roma “La Sapienza”, Italy
[antonio.cenedese@uniroma1.it] [http://www.uniroma1.it/]
- K. T. Christensen, Mechanical Science and Engineering, University of Illinois at Urbana-Champaign USA
[ktc@illinois.edu] [http://www.mechse.uiuc.edu]
- E. Cossali, Università degli Studi di Bergamo, Italy
[gianpietro.cossali@unibg.it] [http://www.unibg.it]
- J. Czarske, Dresden University of Technology, Faculty of Electrical Engineering and Information Technology, Germany
[juergen.czarske@tu-dresden.de] [http://eeemp1.et.tu-dresden.de/]
- L. Djenidi, Mechanical Engineering Department, The University of Newcastle, Australia
[lyazid.djenidi@newcastle.edu.au] [http://www.newcastle.edu.au/]
- G.E. Elsinga, Laboratory for Aero and Hydrodynamics, Delft University of Technology, The Netherlands
[g.e.elsinga@tudelft.nl] [http://www.ahd.tudelft.nl]
- M. Escudier, Department of Mechanical Engineering, The University of Liverpool, United Kingdom
[escudier@liverpool.ac.uk ] [http://www.liv.ac.uk/]
- J. A. Fitzpatrick, Department of Mechanical and Manufacturing Engineering, Trinity College Dublin, Ireland
[john.fitzpatrick@tcd.ie ] [http://www.tcd.ie/]
- S. Gogineni, Spectral Energies, LLC., USA
[spgogineni@gmail.com] [http://www.spectralenergies.com]
- James Gord, Combustion & Laser Diagnostics Research Complex Air Force Research Laboratory Propulsion Directorate
[james.gord@wpafb.af.mil] [http://www.wpafb.af.mil/afrl/rz/]
- Y. Hardalupas, Department of Mechanical Engineering, Imperial College London, UK
[y.hardalupas@ic.ac.uk] [http://www.ic.ac.uk/]
- Y. Hassan, Department of Nuclear Engineering, Texas A&M University, USA
[y-hassan@tamu.edu] [http://www.tamu.edu/]
- S. Hosokawa, Kobe University Rokkodai, Japan
[hosokawa@kobe-u.ac.jp] [http://www.kobe-u.ac.jp]
- Y. Ikeda, Imagineering, Inc., Japan
[yuji@imagineering.jp] [http://www.imagineering.jp/]
- M. Jermy, University of Canterbury, Mechanical Engineering, New Zeland
[mark.jermy@canterbury.ac.nz] [http://www.mech.canterbury.ac.nz/people/jermy.shtml]
- C. J. Kähler, Institute of Fluid Mechanics and Aerodynamics Bundeswehr University Munich, Germany
[christian.kaehler@unibw.de ] [http://www.unibw.de/lrt7/]
- Y. Kawaguchi, Department of Mechanical Engineering, Tokyo University of Science, Japan
[yasuo@rs.noda.tus.ac.jp] [http://www.tus.ac.jp/]
- K. Kiger, Department of Mechanical Engineering, University of Maryland
[kkiger@eng.umd.edu] [http://terpconnect.umd.edu/~kkiger/]
- K. C. Kim, Division of Mechanical Engineering, Pusan National University, Korea
[kckim@hyowon.pusan.ac.kr] [http://www.pusan.ac.kr/]
- J. Kompenhans, Institute of Aerodynamics and Flow Technology, German Aerospace Center (DLR), Germany
[juergen.kompenhans@dlr.de ] [http://www.dlr.de/]
- B. Lecordier, Université et INSA de Rouen, France
[bertrand.lecordier@coria.fr] [http://www.coria.fr]
- A. Lecuona , Department of Thermal and Fluids Engineering, Universidad Carlos III de Madrid, Spain
[lecuona@ing.uc3m.es ] [http://www.uc3m.es/]
- A. Leder, Faculty of Mechanical and Naval Engineering, University of Rostock, Germany
[alfred.leder@uni-rostock.de] [http://www.uni-rostock.de/lsm]
- F. Lemoine, Institut National Polytechnique de Lorraine, Laboratoire d'Énergétique et de Mécanique Théorique et Appliquée, France
[fabrice.lemoine@ensem.inpl-nancy.fr] [http://www.inpl-nancy.fr/francais/rechvalo/r_labos/rp_lemta.php]
- A. Lozano, LITEC, University of Zaragoza, Spain
[alozano@litec.csic.es ] [http://www.litec.csic.es/]
- D. Markovich, Institution of the Russian Academy of Sciences, the Kutateladze Institute of Thermophysics, Siberian Branch of the RAS
[dmark@itp.nsc.ru] [http://www.sbras.ru/sbras/db/show_adm.phtml?eng+14]
- I. Marusic, Department of Mechanical and Manufacturing Engineering, The University of Melbourne, Australia
[imarusic@unimelb.edu.au] [http://www.mame.mu.oz.au/]
- Hui Meng, State University of New York, USA
[huimeng@buffalo.edu] [http://www.mae.buffalo.edu/]
- R. Menon , TSI Incorporated, USA
[rmenon@tsi.com] [http://www.tsi.com/]
- J. F. Meyers, Advanced Measurement and Diagnostics Branch, NASA Langley Research Center, USA
[james.f.meyers@larc.nasa.gov ] [http://www.larc.nasa.gov/]
- G. Mungal, Department of Mechanical Engineering, Stanford University, USA
[mungal@stanford.edu] [http://www.stanford.edu/]
- T. Niimi, Department of Mechanical Science & Engineering, Nagoya University,
[niimi@mech.nagoya-u.ac.jp] [http://www.mech.nagoya-u.ac.jp/index.html]
- H. Nobach, Max-Planck-Institut fur Dynamic und Selbstorganisation, Germany
[holger.nobach@nambis.de] [http://www.nambis.de/]
- K. Okamoto, University of Tokyo, Japan
[okamoto@k.u-tokyo.ac.jp] [http://utvis.net]
- F. Onofri, École Polytechnique Universitaire de Marseille, France
[Fabrice.Onofri@polytech.univ-mrs.fr] [http://iusti.polytech.univ-mrs.fr/~onofri/]
- V. Palero, Instituto de Investigación en Ingeniería de Aragón, Universidade de Zaragoza, Spain
[palero@unizar.es] [http://i3a.unizar.es/]
- M. Panão, Instituto Superior Técnico
[mpanao@dem.ist.utl.pt] [http://ltces.dem.ist.utl.pt/]
- F. Pinho, Department of Mechanical Engineering, Faculdade de Engenharia do Porto, Portugal
[fpinho@fe.up.pt] [http://www.fe.up.pt/]
- G. Pitcher, Powertrain Research, Lotus Engineering Ltd, UK
[gpitcher@lotuscars.co.uk] [http://www.grouplotus.com/engineering/home.html]
- C. Poelma, Laboratory for Aero & Hydrodynamics, Delft University of Technology, The Netherlands
[c.poelma@tudelft.nl] [http://www.pe.tudelft.nl/node/24]
- Oliver Pust, Dantec Dynamics
[oliver.pust@dantecdynamics.com] [www.dantecdynamics.com]
- H. Qiu , Department of Mechanical Engineering, Hong Kong University of Science and Technology, Hong Kong
[meqiu@ust.hk] [http://www.ust.hk/]
- M. L. Riethmuller, Environmental and Applied Fluid Dynamics Department, Von Karman Institute for Fluid Dynamics, Belgium
[riethmuller@vki.ac.be] [http://www.vki.ac.be/]
- D. Rockwell, Department of Mechanical Engineering and Mechanics, Lehigh University, USA
[dor0@lehigh.edu] [http://www3.lehigh.edu/engineering/meche/]
- T. Roesgen, ETH Zürich, Institute of Fluid Dynamics, Switzerland
[roesgen@ifd.mavt.ethz.ch] [http://www.ifd.mavt.ethz.ch/people/roesgen]
- G. Romano, Department of Mechanics and Aeronautics, Università degli Studi di Roma “La Sapienza”, Italy
[romano@dma.ing.uniroma1.it] [http://www.uniroma1.it/]
- J. Sakakibara, Department of Engineering Mechanics and Energy, University of Tsukuba, Japan
[sakakiba@kz.tsukuba.ac.jp] [http://www.tsukuba.ac.jp/]
- F. Scarano, Department of Aerospace Engineering, Delft University of Technology, The Netherlands
[f.scarano@lr.tudelft.nl] [http://www.hsa.lr.tudelft.nl/]
- J. S. Shrimpton, School of Engineering Sciences, University of Southampton
[John.Shrimpton@soton.ac.uk] [http://www.soton.ac.uk/ses/]
- R. Simpson, Department of Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University, USA
[simpson@aoe.vt.edu] [http://www.aoe.vt.edu/]
- J. Soria, Monash University, Department of Mechanical and Aerospace Engineering, Australia
[julio.soria@eng.monash.edu.au] [http://www.eng.monash.edu.au/mechanical/]
- J. Srulijes, French-German Research Institute of Saint-Louis (ISL), France
[julio.srulijes@isl.eu] [http://www.isl.eu/Default.aspx]
- M. Stanislas, Ecole Centrale de Lille, LML URA CNRS 1441, France
[michel.stanislas@ec-lille.fr ] [http://lml.univ-lille1.fr/lml/?page=15&manID=81]
- D. Stepowski, UMR – CORIA, CNRS/Université de Rouen, France
[denis.stepowski@coria.fr] [http://www.coria.fr/]
- H. J. Sung, Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Korea
[hjsung@kaist.ac.kr] [http://flow.kaist.ac.kr]
- N. Syred, School of Engineering, Cardiff University, Wales, UK
[SyredN@Cardiff.ac.uk ] [http://www.cardiff.ac.uk/]
- M. Tanahashi, Tokyo Institute of Technology, Japan
[mtanahas@mes.titech.ac.jp] [ http://www.3mech.titech.ac.jp/index_e.html]
- A. M. Taylor, Imperial College London, United Kingdom
[a.m.taylor@ic.ac.uk] [http://www.ic.ac.uk]
- E. Tomita, Okayama University, Japan
[tomita@mech.okayama-u.ac.jp] [http://powerlab.mech.okayama-u.ac.jp/]
- D. Towers, The University of Leeds, United Kingdom
[d.p.towers@leeds.ac.uk] [http://www.leeds.ac.uk/]
- S. T. Wereley, School of Mechanical Engineering, Purdue University, USA
[wereley@purdue.edu] [http://www.purdue.edu/]
- J. Westerweel, Laboratory for Aero and Hydrodynamics, Delft University of Technology, The Netherlands
[J.Westerweel@tudelft.nl] [http://www-ah.wbmt.tudelft.nl/]
- B. Wieneke, LaVision GmbH, Germany
[bwieneke@lavision.de ] [http://www.lavision.de/]
- C. Willert, Institute of Propulsion Technology, German Aerospace Center (DLR), Germany
[chris.willert@dlr.de] [http://www.dlr.de/at/]
- M. Yianneskis, Department of Mechanical Engineering, King’s College London, United Kingdom
[michael.yianneskis@kcl.ac.uk ] [http://www.kcl.ac.uk/]
- M. Yoda, George W. Woodruff School of Mechanical Engineering, USA
[minami.yoda@me.gatech.edu] [http://www.gatech.edu/]
- K. Zähringer, Institute of Fluid Dynamics & Thermodynamics Lab. of Fluid Dynamics & Technical Flows
[katharina.zaehringer@vst.uni-magdeburg.de] [http://www.uni-magdeburg.de/isut/LSS/english/index_en.html]
|
|
